it’s far personal preference on whether or not to color the woodwork first or the walls. commonly, it is nice to paint the emulsion on the walls first as emulsion does not constantly ‘take’ over gloss paint.
once all of the preparation has been completed on the partitions and any filler rubbed clean with first-class glass paper – begin painting! while portray a mild shade over a darkish present shade it is fine to use an undercoat of white. both that or be prepared to present the walls or three coats of paint to make sure complete coverage. not anything seems worse than pale partitions with the dark coloration displaying thru; it looks maximum unprofessional and you’ll now not be satisfied with the end result. begin via painting the wall from the top down, this can allow you make certain there aren’t any paint runs in the completed wall.
After the woodwork has been prepared, start portray from the top of the room down. Use a terrific fine primer on new timber, followed by using a best sprayer for walls the undercoat. when re-portray over present paintwork it’s far first-rate to apply a ‘one coat’ gloss paint which is effortlessly to be had from DIY stores and most hardware stores.
In painting home windows, use masking tape to cowl a small strip of the 4 edges of the glass. Paint from the top down to keep away from drips and runs. keep in mind no longer to put an excessive amount of paint on the brush as this could produce drips and runs. additionally do now not attempt to unfold the paint too thinly as this may go away unpleasant brush marks. Do not be tempted to pull off the masking tape for at least 24 hours; otherwise it’ll be a waste of time the usage of it!
whilst you paint doors it’s far really helpful to additionally begin painting at the top and work downwards; use a final up and down stroke of the comb to mixture the paint in the equal route to assist eliminate brush lines.
take into account to paint the baseboards! Use the same method of coaching then painting.